Bottom Release / Curved Trigger

JARD Trigger System for Savage® 10/110 (Pre-2026)

14 Review(s) Write a Review

Your Price: $219.95

Part Number: 4556

Availability: Assembled-to-Order

Release Type *

Trigger Profile *

Pull Weight *

3-Position Safety Add-on *

Quantity

Description
Customer Reviews

The JARD Trigger System for Savage® 10/110 rifles comes housed for ease of installation. It's compatible with the majority of Savage® 10/110 type rifles (see full list of compatible models below). Available in 3 pull weight ranges, 7-12 oz., 13-18 oz., and 24-32 oz. this trigger upgrade offers a notable improvement over the factory trigger. These lighter pull weights in conjunction with the minimal pretravel and crisp break, provide a practical option for increasing your Savage® 10/110 rifle's capability.

Get the most out of your Savage® rifle with this premium aftermarket trigger option from JARD.

Features Include:

Single Stage Operation
Drop-in Installation (some inletting required in AccuStock and some aftermarket chassis)
Milled Aircraft Grade Aluminum Housing for Lasting Durability
3-Position Safety add on available for replacing non AccuTrigger

Compatability

JARD Savage® 10/110 Trigger System replaces standard trigger and AccuTrigger for the following models manufactured from 1966 to 2025:

10, 110, 11, 111, 12, 112, 14, 114, 16, 116, Stevens 200

Compatible with AccuTrigger 3 position safeties.

* If your rifle has a pre AccuTrigger, you must also purchase JARD 3-Position Safety for Savage® Centerfire Rifles for your safety to function properly.

* Inletting required for proper fitment in Savage's AccuStock as well as some after market chassis.

Operator's Instruction Manual: JARD Trigger System for Savage® 10/110 (Pre-2026)

Installation Guide: JARD Trigger System for Savage® 10/110 (Pre-2026)

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

Reviews Sorting

Excellent trigger. Using in ultimate benchrest competition and I can highly recommend

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Ken DeBord from NC on 9/16/2025

Bottom Bolt Release Masterpiece

My factory accutrigger was tuned when I blueprinted my Savage 10 with a gunsmith, however it always felt a little gritty and if set to light would fire if the bolt was slammed home. The JARD solved both of these issues with a light, crisp and reliable setup. I did have to modify the Bottom Bolt release lever (removed 1.5mm of material) in my Gen1 XLR Element as the release lever seems to require more movement on the JARD than the stock trigger to engage the sear properly - otherwise the trigger dropped right into the chassis. Savages main complaint vs Remington 700s is the lack of trigger options and the JARD solves that in my opinion.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Ryan from Colorado on 9/19/2025

Great upgrade to Accutrigger

Replaced the factory trigger in my Savage Model 12 FTR gun. I really like the Jard. Install was easy but I did have to Dremel the inletting on the stock a tiny bit to get the bolt release lever to clear. No big deal, just something to watch out for. Trigger breaks clean and light. I actually almost AD’d the first time I tried it since it was so light.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Robert Ostrowe from Ridgewood on 6/29/2025

No Creep/Crisp

bought the 13-18 for my savage 110. had the factory 1.5 lb target trigger, which would fire if bolt slammed. the Jard does not fire when bolt is worked hard. no creep, crisp. now I like this rifle again. great job Jard.