JARD Trigger Upgrade Kit for Ruger® M77 Mark II / Hawkeye®

9 Review(s) Write a Review

Your Price: $94.95

Part Number: M77

Availability: Assembled-to-Order

Model *

Finish *

Pull Weight *

Additional Trigger Springs

1 lb. (1126) (+$5.50) 1.5 lbs. (1127) (+$5.50) 2 lbs. (1128) (+$5.50) 2.5 lbs. (1129) (+$5.50)

Quantity

Description
Customer Reviews

This trigger upgrade kit brings JARD's exceptional trigger performance to the Ruger® M77 Mark II / Hawkeye platform. Experience the clean, crisp break of a JARD trigger in your M77 Mk II today! With adjustable sear engagement, adjustable overtravel and four pull weights to choose from, you're fine tune your trigger to achieve the perfect trigger pull.

*Pull weights are based on black finish. Silver finish pulls are approximately 1/2 -1 lb. lighter than listed.

Compatibility

Kit for Ruger® M77 Mark II is compatible with the following Models:

M77 Mark II
M77 Mark II VT

Kit for Ruger® M77 Mark II with Rotary Magazine is compatible with the following Models:

77/22® LR
77/17® HMR
77/17® WSM
77/17® Hornet
77/357®
77/44®

Manual: JARD Trigger Upgrade Kit for Ruger® M77

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.9

Reviews Sorting

Like butter!

Amazing upgrade for my ruger 77/17! Factory trigger was wayyy too heavy, so had to make a change. JARD aced this one. At 1.5# or less it shoots amazing and trigger feels perfect!

Did you find this helpful? 8 of 9 Found Helpful

Reviewed by: Alan from West virginia on 7/2/2025

trigger upgrade

Easy to install. It works perfectly!

Did you find this helpful? 8 of 10 Found Helpful

Reviewed by: Jerry Sullivan from KINGMAN on 6/30/2025

Very clean trigger

Crisp and light trigger pull. Very consistent around 2lbs.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Brent from Montana on 3/26/2026

Happy to say the least!

Bought this trigger for my Ruger 77/17WSM and could not be happier. The install was quite involved in my opinion. I turned to YouTube to help guide me but was hard pressed to find a “good” installation video. The directions, although adequate, were very short and sweet to put it lightly. I was able to make my way but could easily see someone deciding to take this to a gunsmith for installation. All that to say, I was very happy with the finished product. Very clean, crisp, and light trigger, a huge upgrade from the gritty, heavy trigger from factory! Highly recommend this trigger upgrade.

Did you find this helpful?

Reviewed by: Caleb from Vian on 4/18/2026

custpmer

big improvement over factory trigger. it does take some time/adjustments to make sure everything is working correctly/smoothly, but it was not that difficult

Did you find this helpful?

Reviewed by: Chris Oster from Ray on 4/30/2026

Average American hunter

Great product and a way better improvement over factory trigger. Directions were short and to the point. The average gun person should be able to tackle this themselves. The safety was a pain to get adjusted right but it just takes time. I have used several of these trigger in my Ruger M77 gun and I sure like them.

Did you find this helpful?

Reviewed by: Tate Collins from Kansas on 5/11/2026

Jard #1 1/2 trigger

I purchased and installed the 1 1/2 lb trigger in my Ruger 77/17 and it was a simple operation. Reduced the trigger pull to around 25 Oz. Take your time and get the safety adjustment as the instructions recommend and this trigger will work great. I did not have to modify the stock to install this trigger. This rifle is one of my go to guns for shooting ground squirrels and this trigger has been a game changer!

Did you find this helpful?

Reviewed by: Kent from Northern California on 5/29/2026

Jard 77/17 wsm

Was able to get consistent 1.25 lb pulls with this trigger. Highly recommend trigger pin and sear pin shims in conjunction with this trigger as my Ruger action had excessive play in those areas. Very happy with this trigger.

Did you find this helpful?

Reviewed by: John Bursell from Utah on 6/3/2026

Excellent trigger

Put the trigger on my Ruger m77 markii chambered in .243WIN. Install was super easy. Was a huge improvement over the stock trigger. I went with 1.5lb trigger pull and really enjoy it for target shooting. Definitely helps for those longer range shots.

Did you find this helpful?

Reviewed by: Michael Franco from Hailey on 6/6/2026

JARD Trigger Upgrade Kit for Ruger® M77 Mark II / Hawkeye®

Choose Options

Rating Snapshot

Average Customer Ratings

Recently Viewed Items